RTi core 1.0.3 BETA

**MickeySa** · 14-12-2010, 05:30 AM

Code:

RTi core 1.0.3 BETA Image based on : Enigma 2 from 04-12-2010

New kernel by the_ripper

What is new ?

- Applied New Audio FIX

- Interlace/Deinterlace FIX

- Fixed 30% CPU BUG ( Better stabillity )

- Better VFD Support

- Volume UP/Down fully fixed

- Fixed System clock

- Better overall stabillity

- A lot of changes on Enigma 2 ( A/V Settings EXPERIMENTAL , Welcome w i z a r d )

- Fixed Multimedia ( MKV, AVI ) now OK

- A lot of other small fixes and changes internally

We hope that next release will be RC1 ( Release candidate 1 ) as Recording and Subtitles are in internal Testing phase.

WE WOULD LIKE TO SAY THANKS TO OPENSAT WHICH WAS INVOLVED TO PUT ALL EFFORTS TO SUPPORT AND COOPERATE ON THIS PROJECT

*** Please use AzUP v1.2.5 by telesat to Flash this new RTi core 1.0.3 BETA version of Enigma 2 in Your receiver including the KERNEL!!! , and read Release notes of AzUP v1.2.5 ***

*** KEEP IN MIND THAT THIS IS FULLY CLEAN CVS IMAGE, AND IT NOT CONTAIN ANY ILLEGAL FILES INSIDE ***

Download:

Code:

http://www.azbox-enigma.eu/

**@telesat** · 14-12-2010, 05:43 AM

This is a part of all updates , most updates and fix is in test phase...
Soon , very soon , RTi_Core_ RC1 is coming up and i think It will be
quite useable ver.

Also new tool for update E2 on azbox .... made by me

rgs,
telesat

**paulobr** · 14-12-2010, 07:25 AM

Originally Posted by @telesat

This is a part of all updates , most updates and fix is in test phase...
Soon , very soon , RTi_Core_ RC1 is coming up and i think It will be
quite useable ver.

Also new tool for update E2 on azbox .... made by me

rgs,
telesat

Thaks guys you are the best.

**massimo1167** · 14-12-2010, 07:59 AM

THANKS FOR YOUR GREAT WORK!!!

There is a little problem with audio video setup:

After A/V setup (I've setted HDMI 1080p 100Hz), the content of file "/etc/videomodeaz" is:

Code:

-component -f

No output video with HDMI or SCART.

I've modified "/etc/init.d/bootup" in this way:

Code:

insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="-analog -f PAL_BG -digital -f HDMI_1080p50 -hdmi_chip $hdmichip 0 14 15 100 0"
#Vmode=`cat /etc/videomodeaz`
#if [ -n "$Vmode" ]; then
#	insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="$Vmode"
#else
#	insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="-analog -f PAL_BG -digital -f HDMI_720p50 -hdmi_chip $hdmichip 0 14 15 100 0"
#fi

New CPU% Usage:

Code:

Mem: 91576K used, 9192K free, 0K shrd, 2560K buff, 46164K cached
CPU:  2.5% usr 16.8% sys  0.0% nic 80.5% idle  0.0% io  0.0% irq  0.0% sirq
Load average: 2.05 1.91 1.18 1/46 1991
  PID  PPID USER     STAT   VSZ %MEM CPU %CPU COMMAND
 1572     1 root     D     2520  2.5   0 15.4 insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options=-analog -f PAL_BG -digital -f HDMI_1080p50 -hdmi_chip SiI9030 0 14 15 100 0
 1895  1892 root     S    81916 81.2   0  2.0 /usr/bin/enigma2
 1991  1989 root     R     2836  2.8   0  1.3 top
 1988  1719 root     S     2840  2.8   0  0.1 telnetd
  633     2 root     SW       0  0.0   0  0.1 [usb-storage]
    3     2 root     SWN      0  0.0   0  0.1 [ksoftirqd/0]
 1897  1892 root     S    81916 81.2   0  0.0 /usr/bin/enigma2
 1949  1892 root     S    81916 81.2   0  0.0 /usr/bin/enigma2
 1969  1892 root     S N  81916 81.2   0  0.0 /usr/bin/enigma2
 1673     1 root     S    10036  9.9   0  0.0 smbd -D
 1712  1673 root     S    10036  9.9   0  0.0 smbd -D
 1671     1 root     S     5924  5.8   0  0.0 nmbd -D
 1631     1 avahi    S     3168  3.1   0  0.0 avahi-daemon: running [AZBox.local]
 1989  1988 root     S     2836  2.8   0  0.0 -sh
 1593     1 root     S     2520  2.5   0  0.0 insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options=-analog -f PAL_BG -digital -f HDMI_1080p50 -hdmi_chip SiI9030 0 14 15 100 0
 1892     1 root     S     2520  2.5   0  0.0 /bin/sh /usr/bin/enigma2.sh
 1622     1 messageb S     2424  2.4   0  0.0 /usr/bin/dbus-daemon --system
 1716     1 root     S     2364  2.3   0  0.0 /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key -p 22
 1987  1985 root     S     2328  2.3   0  0.0 vsftpd
 1985  1719 nobody   S     2304  2.2   0  0.0 vsftpd
 1820     1 root     S     2268  2.2   0  0.0 /usr/sbin/automount --pid-file=/var/run/autofs/_autofs.pid --timeout=1 --ghost /autofs file /etc/auto.hotplug
  744     1 root     S <   2188  2.1   0  0.0 udevd --daemon
 1719     1 root     S     1840  1.8   0  0.0 /usr/sbin/inetd
    1     0 root     S     1732  1.7   0  0.0 init [3]
    5     2 root     SW       0  0.0   0  0.0 [khelper]
  688     2 root     SW       0  0.0   0  0.0 [kjournald]
   50     2 root     SW       0  0.0   0  0.0 [pdflush]
 1968     2 root     SW       0  0.0   0  0.0 [kdvb-ad-0-fe-0]
 1539     2 root     SW       0  0.0   0  0.0 [irvfd]
    2     0 root     SW       0  0.0   0  0.0 [kthreadd]
    4     2 root     SW       0  0.0   0  0.0 [events/0]
   27     2 root     SW       0  0.0   0  0.0 [kblockd/0]
   28     2 root     SW       0  0.0   0  0.0 [cqueue/0]
   31     2 root     SW       0  0.0   0  0.0 [khubd]
   49     2 root     SW       0  0.0   0  0.0 [pdflush]
   51     2 root     SW       0  0.0   0  0.0 [kswapd0]
   52     2 root     SWN      0  0.0   0  0.0 [kprefetchd]
   53     2 root     SW       0  0.0   0  0.0 [aio/0]
   54     2 root     SW       0  0.0   0  0.0 [cifsoplockd]
   55     2 root     SW       0  0.0   0  0.0 [cifsdnotifyd]
   57     2 root     SW       0  0.0   0  0.0 [xfslogd/0]
   58     2 root     SW       0  0.0   0  0.0 [xfsdatad/0]
  600     2 root     SW       0  0.0   0  0.0 [mtdblockd]
  632     2 root     SW       0  0.0   0  0.0 [scsi_eh_0]
 1568     2 root     DW       0  0.0   0  0.0 [scard]
 1598     2 root     SW       0  0.0   0  0.0 [kjournald]
root@AZBox:~#

I've tested the screenshot too.
The screenshoot is ok, a file was created in /tmp, but not displayed, maybe because the filename is wrong:
file created "1292311599147jpg" insteda of "1292311599147.jpg", the content of that file is the image I've captured...

**DGSCronos** · 14-12-2010, 08:40 AM

Premium+ owner here. Flashing didn't go very well, to say the least. I put the fw on a USB stick, the Azbox recognized the stick & firmware. But during the first flash (before you start Azup) it froze at 32%. After five minutes it was still frozen, so I turned the box on and off. Result, it hangs at booting, won't respond to anything. So now I have to send it to the distributor for repairs again. Nice...

**gabyam6** · 14-12-2010, 08:50 AM

Hi Massimo, are you owner of Premium + ?
See DGSCronos for problem flashing with R.T.i 1.0.3.
Thanks

**azbox4ever** · 14-12-2010, 09:03 AM

Azbox HD premium

All is OK
SD channel
HD channel
CCcam
Wifi
Screenshot (OSD-Video-All) is OK
Multi feed ok on sky select(sub service) but no picture i dont know why

**massimo1167** · 14-12-2010, 09:49 AM

Originally Posted by azbox4ever

Azbox HD premium

All is OK
SD channel
HD channel
CCcam
Wifi
Screenshot (OSD-Video-All) is OK
Multi feed ok on sky select(sub service) but no picture i dont know why

I Have an Azbox HD Premium too.

1) I use standard skin to avoid previus HD quality problem (I will test later the other skin).
Although the quality is better than when there was a problem with the skin, it does not seem to be the best for azbox, even if the HD image quality depends on many things, but this is my first impression.

2) The screenshoot for me doesn't work

3) Now I'm connected from office with openvpn, I'm able to connect with ftp, with telnet, but now I can't connect with webinterface (this evening I will try with my home lan)

4) sometimes I saw CPU usage of "em8634dvb.ko" about 1,5%, I restart 5-6 times, but now and other time CPU usage is about 15%.
Which is the expected value?

Code:

Mem: 85600K used, 15168K free, 0K shrd, 7640K buff, 33640K cached
CPU:  2.1% usr  1.5% sys  0.0% nic 95.4% idle  0.1% io  0.0% irq  0.5% sirq
Load average: 2.94 3.00 2.69 1/49 2047
  PID  PPID USER     STAT   VSZ %MEM CPU %CPU COMMAND
 1925  1922 root     S    82300 81.6   0  1.3 /usr/bin/enigma2
 2047  2040 root     R     2836  2.8   0  1.1 top
 1930     1 root     S    29316 29.0   0  0.3 /usr/camd/mgcamd_1.35a
 1926  1922 root     S    82300 81.6   0  0.2 /usr/bin/enigma2
 1863     1 root     S     4348  4.3   0  0.2 /usr/sbin/openvpn --daemon --writepid /var/run/openvpn.client.conf.pid --config /var/etc/openvpn/client.conf --cd /var/etc/openvpn
 2039  1721 root     S     2840  2.8   0  0.2 telnetd
 1977  1922 root     S    82300 81.6   0  0.0 /usr/bin/enigma2
 1996  1922 root     S N  82300 81.6   0  0.0 /usr/bin/enigma2
 1920     1 root     S    29316 29.0   0  0.0 /usr/camd/mgcamd_1.35a
 2038     1 root     S    29316 29.0   0  0.0 /usr/camd/mgcamd_1.35a
 1931     1 root     S    29316 29.0   0  0.0 /usr/camd/mgcamd_1.35a
 1666     1 root     S    10036  9.9   0  0.0 smbd -D
 1713  1666 root     S    10036  9.9   0  0.0 smbd -D
 1664     1 root     S     5924  5.8   0  0.0 nmbd -D
 1624     1 avahi    S     3168  3.1   0  0.0 avahi-daemon: running [AZBox.local]
 2040  2039 root     S     2836  2.8   0  0.0 -sh
 1830     1 root     S     2664  2.6   0  0.0 /usr/sbin/automount --pid-file=/var/run/autofs/_autofs.pid --timeout=1 --ghost /autofs file /etc/auto.hotplug
 1565     1 root     D     2520  2.5   0  0.0 insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options=-analog -f PAL_BG -digital -f HDMI_1080p50 -hdmi_chip SiI9030 0 14 15 100 0
 1587     1 root     S     2520  2.5   0  0.0 insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options=-analog -f PAL_BG -digital -f HDMI_1080p50 -hdmi_chip SiI9030 0 14 15 100 0
 1922     1 root     S     2520  2.5   0  0.0 /bin/sh /usr/bin/enigma2.sh
 1615     1 messageb S     2424  2.4   0  0.0 /usr/bin/dbus-daemon --system
 1718     1 root     S     2364  2.3   0  0.0 /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key -p 22
  744     1 root     S <   2188  2.1   0  0.0 udevd --daemon
 1721     1 root     S     1840  1.8   0  0.0 /usr/sbin/inetd
    1     0 root     S     1732  1.7   0  0.0 init [3]
  633     2 root     SW       0  0.0   0  0.0 [usb-storage]
    3     2 root     SWN      0  0.0   0  0.0 [ksoftirqd/0]
  688     2 root     SW       0  0.0   0  0.0 [kjournald]
 1988     2 root     SW       0  0.0   0  0.0 [kdvb-ad-0-fe-0]
    4     2 root     SW       0  0.0   0  0.0 [events/0]
    5     2 root     SW       0  0.0   0  0.0 [khelper]
 1532     2 root     SW       0  0.0   0  0.0 [irvfd]
   50     2 root     SW       0  0.0   0  0.0 [pdflush]
   51     2 root     SW       0  0.0   0  0.0 [kswapd0]
    2     0 root     SW       0  0.0   0  0.0 [kthreadd]
   27     2 root     SW       0  0.0   0  0.0 [kblockd/0]
   28     2 root     SW       0  0.0   0  0.0 [cqueue/0]
   31     2 root     SW       0  0.0   0  0.0 [khubd]
   49     2 root     SW       0  0.0   0  0.0 [pdflush]
   52     2 root     SWN      0  0.0   0  0.0 [kprefetchd]
   53     2 root     SW       0  0.0   0  0.0 [aio/0]
   54     2 root     SW       0  0.0   0  0.0 [cifsoplockd]
   55     2 root     SW       0  0.0   0  0.0 [cifsdnotifyd]
   57     2 root     SW       0  0.0   0  0.0 [xfslogd/0]
   58     2 root     SW       0  0.0   0  0.0 [xfsdatad/0]
  600     2 root     SW       0  0.0   0  0.0 [mtdblockd]
  632     2 root     SW       0  0.0   0  0.0 [scsi_eh_0]
 1561     2 root     DW       0  0.0   0  0.0 [scard]
 1591     2 root     SW       0  0.0   0  0.0 [kjournald]
root@AZBox:~#

BUT E2 FOR AZBOX IS NEAR TO THE TARGET!!!!

**moicas3004** · 14-12-2010, 11:20 AM

How it is possible that after so many explaining about flashing, there is still guys that block the box?

I have tested all version of E2 Azbox without any problems what so ever.

**Blackie** · 14-12-2010, 11:33 AM

Sorry to hear about your problem DGSCronos.

Could be the problem reason for DGSCronos update failure related to installation to USB? Has anybody succeeded with installation of RTI 1.0.3 to USB?

**DGSCronos** · 14-12-2010, 11:44 AM

Originally Posted by moicas3004

How it is possible that after so many explaining about flashing, there is still guys that block the box?

I have tested all version of E2 Azbox without any problems what so ever.

I have also flashed a lot of azboxes without any problems. I also just flashed a premium with the new 1.03. That went okay. With the same usb stick, so the stick is not the problem. With my premium+ the flashing just stalled. Really no idea why.

**moicas3004** · 14-12-2010, 11:46 AM

Originally Posted by DGSCronos

I have also flashed a lot of azboxes without any problems. I also just flashed a premium with the new 1.03. That went okay. With the same usb stick, so the stick is not the problem. With my premium+ the flashing just stalled. Really no idea why.

Oh. Ok.

can´t you try the serial conection as the recovery manual on satpimps?

**DGSCronos** · 14-12-2010, 12:02 PM

Originally Posted by moicas3004

Oh. Ok.

can´t you try the serial conection as the recovery manual on satpimps?

Dunno, never tried that before. I'll read up on that.

**cs_azbox** · 14-12-2010, 12:21 PM

[QUOTE=massimo1167;775051]THANKS FOR YOUR GREAT WORK!!!

There is a little problem with audio video setup:

After A/V setup (I've setted HDMI 1080p 100Hz), the content of file "/etc/videomodeaz" is:

Code:

-component -f

No output video with HDMI or SCART.

I've modified "/etc/init.d/bootup" in this way:

Code:

insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="-analog -f PAL_BG -digital -f HDMI_1080p50 -hdmi_chip $hdmichip 0 14 15 100 0"
#Vmode=`cat /etc/videomodeaz`
#if [ -n "$Vmode" ]; then
#	insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="$Vmode"
#else
#	insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="-analog -f PAL_BG -digital -f HDMI_720p50 -hdmi_chip $hdmichip 0 14 15 100 0"
#fi

[QUOTE]
Once you made this modification, the output is running well scart?

**T0rca1950** · 14-12-2010, 12:28 PM

SD channels - ok
HD channels - ok (some little flickering sometimes at the top and bottom of the image, but it's ok)
CCcam - ok
Media player - ok (avi files are fixed, at least that one I tested)
Clcock - ok (for now ;-p)

But there are still some little things that have to be fixed...
- When i zap a channel and after that press for example "exit" or "ok" button it zaps again foward or backward... Wierd...
- On some SkyIT channels default language is not Italian but it should be...
- Key maping on the remote isn't logical, i would put "ok" button to enter in the channel list, "exit" button to show channel info, "up" and "down" buttons to change the channels and "left" and "right" buttons for volume...
- In the CrossEPG settings XEPGDB provaider list is empty, so we have to install it manually every time...

This is a big step foward! Keep the good work guys! TY for all.

**MrTrapper** · 14-12-2010, 12:52 PM

Hello to ST!
"..HD channels - ok (some little flickering sometimes at the top and bottom of the image, but it's ok).."
But, what about HD picture Qualitty?
MickeySa told, about crystal clear picture, in read me file of fixed things..
Rgs!
Trapper

**hfmls** · 14-12-2010, 12:59 PM

mediaplayer is fixed!!!

.avi 700mb xvid (seek works perfect, no more audio loss after 2 minutes, no more slow motion, .srt subtitles are perfect)
.avi (xvid) are perfect now!

.mkv samples tested 29 mb/s with DTS and 40 mb/s with DTS! working perfect too! gonna test now 10gb and 15gb full mkv movies.

THE_RIPPER AND TEAM YOU'RE FU***G GENIOUS!
this image is awsome!

**iceman3108** · 14-12-2010, 02:04 PM

Originally Posted by T0rca1950

- Key maping on the remote isn't logical, i would put "ok" button to enter in the channel list, "exit" button to show channel info, "up" and "down" buttons to change the channels and "left" and "right" buttons for volume...

IMHO I would keep the same key mapping as the original FW had. All the Azbox users are used to it, so why change it? Could the programmers map the RC keys to have it like the original FW?

**hfmls** · 14-12-2010, 02:16 PM

i have same opinion too. it takes a few days to get used too. but it's ok.
but i prefer original mode too

in mediaplayer and tv mode like original firmware.

**ddamir** · 14-12-2010, 02:28 PM

I have never used the original FW.
If someone wants to have its own combination of keys on the RC, simply edit keymap.xml (/usr/share/enigma2) and set for themselves.
This is an "enigma" and has its own advantages and disadvantages.

WBR
DDamir