Enigma 2 by The_ripper - TEST -

[MickeySa]

by the_ripper :

@all

Pls stop updating to E2 test till I figure it out safe way to back original FW, becasue some of you doesnt get IP address so cant telnet/ftp


Hello guy's,

With big thanks to the The_ripper, we got the First version of Enigma 2 which we can test on our AzBox HD Receivers :

This version is only for Elite and Premium.

Premium+ version will be out also today.

Raskino we are shame on YOU !!! And all what You said against AzBox HD devices !!!

Elite / Premium:

http://rapidshare.com/files/406526152/patch.rar.html

Premium+ :

http://rapidshare.com/files/406541041/Premium__E2.rar

Transfer the patch.bin file to the FA**2 formated usb stick, and update Your receiver like with normal azbox fw.

All comments are welcome.

Web If working, Telnet working, FTP working.

BEFORE Puthing this Enigma 2, take care to also connect receiver with Your local area network, so if something goes wrong, You can use rescue files to back to the original version of FW !!!

Small app for returning back on AzBox Official FW will be ready today

Keep in the mind, that this enigma is running without Tuner drivers, which still have to be finished !!!

Once more thanks to The_ripper and telesat for this nice release !!!

Please re-upload files and mirrors to Rapidshare, as download limit is 10 times...

If You have problem with E2 and want to go back to the original FW, as this is beta version :

Download file BACK TO ORIGINAL FW.rar , attached to this post.

First DELETE 2 pictures from the MMP directory !!! and than transfer this files !!!

Put file update in the /tmp directory and give CHMOD 755 .

Also , put the file backup_kernel in /MMP directory .

Connect to telnet, and run this command :

./update /MMP/backup_kernel

NOTE: Also You can put this files on usb and run them from it !!!

After, that flash AzBox with original fw, that is all.

AzBoxE2Rescue.rar is setup with added FileZilla Portable and Putty, and Rescue Files.

[The_Ripper]

As I said before,

no audio/video/demux/tuners support. But it's on current stage that can be tested what is working for now.

Image is build with Makefile-opendreambox-1.5 for dm800(didnt try new OE 1.6), but for e2 to works, it will need some patches. I will try to upload main diff/write here what I changed.
Many Python code is disabled in mytest.py , Harddisk.py is used from Sh4 build, etc ...
so guys who wants/know Python can start playing/repairing because it want work with default Python code for Dreambox ...

[bawin]

The_Ripper congratulations on the great work you are doing to my question may usd tdt tuner in the future.

Regards

[hfmls]

The_Ripper sorry to be a pain in the ass
HUGE thank you so much for this, all your hard work, you're truly a genious and patient guy.

Can u please create a svn?
so now everybody can help you out?

[raskino]

Raskino we are shame on YOU !!! And all what You said against AzBox HD devices !!!

?????

[kanber_kav]

source code please...

[PsiDOC]

Awesome!!! Thank you sooo much for ALL your hard work!
PSi

[oulit]

source code please...

are you kidding ?..

[MickeySa]

Kernel used in this release of E2 ( 2.6.22-19 patched by Sigma ) :

http://support.wdc.com/product/download.asp?groupid=1003&sid=120&lang=en

Here is make file for OE od DM 800 , 2 small diff files for sources which have to be changed ( for FB , and for priority of process for Kernel 2.6.22-19 ) and .config file for Kernel 2.6.22-19 .

Makefile-opendreambox-1.5 ( for whole image , crosscompiler, and all lib's etc. )

All files provided by the_ripper, thanks goes to him.

[MickeySa]

Look the first post, all who want to back to original fw of azbox.

[PsiDOC]

MickeySa & The_Ripper
Huge thanks to The_Ripper for all this development and to MickeySa as you have a hand in it somewhere I am sure. This is very big day for the AZBox and I hope that Openshat sit up and look!
Before I go off and flash the filrmware I have a question though.
When you say there no tuner drivers, does this mean that no satellite signals can be recieved as the satellite tuner will not initialise and work, or are you referring to the UHF TV output tuner?
Many thanks.
PSi

[The_Ripper]

@PsiDOC
Hello yes(no SAT tuners support or any tuner/no signal),
there is to much work needed to be done on Python code/bootup scripts/removing some sh**s that just DM boxes have, before work on second part of the drivers ...

[bawin]

It is lack of drivers for tuners I think that this would be seen channels.

[PsiDOC]

Thanks mate.
I am sure that will come very very soon. Many thanks again. I guess you have spent a lot of time getting it this far.
Psi

[radodroma]

No satellite signal since there is no tuner initialization. Don't rush to update. All is still in experimental stage and needs some tweakinig and a bit of work, specially in Pyton code.. For example the Webif won't start for me and I can't use telnet at the moment to go back to original software..

[Matrix10]

Put file update in the /tmp directory and give CHMOD 755 .

I not see file update in your post ??

p.s Cestitke za dosadasnji rad izgleda jako obecavajuce.

[bawin]

Well, I do not now what happens to the deco I remove the Sun where the enigma taxes and I put the adapter sata with 160gb hd where taxes and put the original firmware stays in booting I will not start.

[tonybam]

Hi
as it was mention no tuner no audio i try to go back to original but fail and also the program not started after rebooting however i can communicat with ftp when upload to temp it deny and stop at 26 MB. waiting for your help and advice.

[MickeySa]

Download again files BACK TO ORIGINAL FW.rar

So, copy the file backup_kernel by ftp to /MMP

copy the file update to /tmp folder, and add CHMOD rights to 755 .

Now, connect to Your azbox with telnet, and type :

cd /tmp

./update /MMP/backup_kernel

And wait, that process complete.

After that, You will be able to flash receiver again with Enigma 2 by the_ripper, or to use AzBox Official firmware, it is up to You.

[tonybam]

Download again files BACK TO ORIGINAL FW.rar

So, copy the file backup_kernel by ftp to /MMP

copy the file update to /tmp folder, and add CHMOD rights to 755 .

Now, connect to Your azbox with telnet, and type :

cd /tmp

./update /MMP/backup_kernel

And wait, that process complete.

After that, You will be able to flash receiver again with Enigma 2 by the_ripper, or to use AzBox Official firmware, it is up to You.

Thanks for you reply but the broblem i have patch file is not completely uploaded to tmp may be because of memory space can idelet some file to increase that when i delet the 2 pictures i upload 35.6 Mb plus back to original file
Thanx