New Firmware Azbox-0.9.4466

tsakman · #1 05-02-2010, 06:37 PM

2010.02.05

azbox-0.9.4466-patch.bin

46.09 MB5405099286e88e0559cfe72b888df8c 3

photo pan + zoom in/out | fix srt timing issue | improved streaming

**xanadu** · #2 05-02-2010, 06:45 PM

| improved streaming

Hopefully streaming has improved on previously not working at all for most of us.

What is SRT?

tsakman · #3 05-02-2010, 06:53 PM

SRT is a subtitle format like sub

tx0 · #4 05-02-2010, 06:56 PM

I 've downgraded to 4295.. haven't tried this 4466.
openxcas need to be rewritten that for sure.

will watch for reports

**Smudger** · #5 05-02-2010, 07:26 PM

I know this was in last version.
So, how does this work? or do I ned to read up about IPTV.
File EPG_SERVER.dat

[HX_EPG]
EPG_ADDR=kartina.pristavka.de
EPG_PORT=8083
IPTV_CH_VERSION=0

**Smudger** · #6 05-02-2010, 07:31 PM

Also

the OpenXcas restart '> >|' button is working in this firmware.

T0rca1950 · #7 05-02-2010, 07:35 PM

Is it in anyway faster or more stable then that firmware from yesterday?

dennisl · #8 05-02-2010, 07:39 PM

If you look at a recording and a new recording starts then the playback stops. Has it always been like this for all fw released?

denton · #9 05-02-2010, 07:46 PM

Quote:

Originally Posted by T0rca1950

Is it in anyway faster or more stable then that firmware from yesterday?

YES!
And OpenXcas menus are instant (ie. quicker than before)
.....................
Good work Opensat (I never thought I'd be saying that!)
Seems they've decided to pull their socks up finally....looking a lot rosier all of a sudden :-)

Observations on Elite model (so far):
> > (FF) / < < (FR) not working properly from TV mode/Recorded Programs
Search not working properly from TV mode/Recorded Programs

denton · #10 05-02-2010, 07:47 PM

Quote:

Originally Posted by tx0

I 've downgraded to 4295.. haven't tried this 4466.
openxcas need to be rewritten that for sure.

will watch for reports

It's fixed in this version.

naporex · #11 05-02-2010, 07:49 PM

Is it only me that in this FW screenshot grab isn't working?

edit:
it works but images are stored in: /DATA/hdb1/picture/
also when i upload an old channel list (fw 4295 for example) it makes totally mess in satlist (->0 E postions etc) not compatibile with new fw?

**goran** · #12 05-02-2010, 07:54 PM

Last 2 FWs gave me an error when trying to DL and install directly into the AZ HD, rather than do it via USB... Anyone else?

**Smudger** · #13 05-02-2010, 08:40 PM

Goran
do you have the correct address in the url as firmware default does not work requires 'http://fw.azupd.com/'
or is it some other error.

**Carp95** · #14 05-02-2010, 08:43 PM

Last 2 fw lost now/next EPG on Dutch provider overhere

**xanadu** · #15 05-02-2010, 08:46 PM

Quote:

Originally Posted by Carp95

Last 2 fw lost now/next EPG on Dutch provider overhere

Did you reboot after?

I found the same problem on Sly Italia until I rebooted.

denton · #16 05-02-2010, 09:05 PM

Quote:

Originally Posted by goran

Last 2 FWs gave me an error when trying to DL and install directly into the AZ HD, rather than do it via USB... Anyone else?

Yes, I confirm - I couldn't update via internet either > failed (download) at around 25%

**hfmls** · #17 05-02-2010, 09:20 PM

i had to use usb too

**@telesat** · #18 05-02-2010, 10:05 PM

Quote:

Originally Posted by denton

Yes, I confirm - I couldn't update via internet either > failed (download) at around 25%

try this :
rm - rf /Download/patch*
then try update via setup menu

rgs,

**goran** · #19 05-02-2010, 10:43 PM

Good, I hope they know what to do now...

But why didn't they know it before they published it, if it was this simple [at least for them...]???

tx0 · #20 05-02-2010, 10:48 PM

this new version is unusable too. what I did:

- upgraded from 4295.
- downloaded "new openxcas"
- restored /PLUGINS from backup
- system restart

now I cant configure Multicas it hangs showing "Data loading"
ps x output shows running emu_module.

Any ideas ????

UPD: fixed